Skip to content

Inside the Foundry and the Machining Plant

An independent casting base and a separate CNC machining plant, run by the same company. Parts do not travel between suppliers.

7,700 ㎡Casting base
150+Staff, two sites
700 tCastings per month
~140,000Pump bodies per month*
46 + 20CNC lathes + VMCs
200,000Machined parts per month
Casting base

Two automatic lines, 700 tonnes a month

Grey iron HT150 / HT200 / HT250 and ductile iron QT450 / QT500, melted in medium-frequency furnaces and poured on two automatic horizontal moulding and pouring lines.

  • 2 automatic horizontal moulding and pouring lines
  • Medium-frequency melting furnaces
  • Horizontal moulding line and jolt-squeeze moulding machines
  • Shakeout and sand-cleaning equipment
  • 300+ sets of standard moulds
Melting→Moulding & pouring→Shakeout & cleaning
Melting area, operator working above the ladle with molten ironCasting line: hot part travelling on the cooling conveyor

Medium-frequency melting area — ladle handling and the pouring line

CNC machining plant with rows of vertical machining centres and part binsRows of horizontal CNC lathes receding along the shop floor

Machining plant — vertical centres and lathe lines

CNC machining plant

46 lathes, 20 vertical machining centres

A separate machining plant handles turning, milling and drilling after casting, with about 200,000 parts of monthly capacity. Spare capacity is available for external machining work.

  • 46 CNC lathes
  • 20 vertical CNC machining centres
  • Special-purpose machining machines
  • Plant floor area: 6,000 m²
Turning→Milling→Drilling
Quality control

Four checks, every batch

01

Incoming material check

Raw material is inspected when it enters the plant.

02

In-process patrol

Patrol inspection during production, not only at the end.

03

Full dimensional & visual check

Every finished part is checked for dimensions and appearance.

04

Pre-shipment sampling

Sampling inspection before the crate is closed.

Inspection equipment

Bridge-type coordinate measuring machine (CMM), 1 unit, in a dedicated temperature-controlled inspection room.

Hardness tester and precision dimensional gauges.

Surface treatment

Rust-preventive treatment and painting as requested by the customer.

E-coating is carried out via a qualified partner line, not in-house.

Surface finish: as per customer requirement.

Finish options
Black finish option on a pump casing
Blue finish option on the same pump casing
Red finish option on the same pump casing

One casting shown in three colours — these are colour options, not three different coating processes. The production finish is agreed per order.

Certificates

Certified for the products we supply

ISO 9001 quality management system certificate

ISO 9001:2015

Quality management system certification, covering sales and after-sales of pump castings and finished pumps.

IECEE CB test certificate

IECEE CB Test Certificate

Product test certification covering water pumps, gear reducers, fans and electric motors.

Shop floor

Casting, machining, inspection, packing

Molten iron at the melting furnace
Pouring molten iron on the automatic moulding line
Castings cooling on the line
Machining hall overview
CNC lathe in operation
Vertical machining centre
Coordinate measuring machine in the temperature-controlled room
Row of CNC lathes
Castings packed in a wooden crate

* About 140,000 standard pump bodies per month is a conversion based on a 5 kg average part weight, not a separate capacity figure.

Book a factory visit

The foundry and the machining plant are both in Fu'an, Ningde. Both are open to customer audits. Please arrange in advance.

Get a Quote WhatsApp